Chapter 3 Installing A Cable; Figure 3-1 Cat5E Ethernet Cable - Zte ZXSDR R8119 Hardware Installation

Chapter 3
Installing a Cable
A CAT5e UTP cable is used as the Ethernet cable. For the cable overview, see

Figure 3-1 CAT5e Ethernet Cable

Prerequisite
The Ethernet cable is as long as needed.
Caution!
l
Do not use STP Ethernet cables.
l
The maximum length of an Ethernet cable from the ZXSDR R8119 to the Pbridge
should be less than 100 m.
Steps
1. Connect one end of the Ethernet cable to the ETH interface of the ZXSDR R8119, see
Figure
SJ-20150805085318-002|2016-08-18 (R1.3)
3-2.
3-1
ZTE Proprietary and Confidential
Figure 3-1.