Basic Operation; Power On/Off - Vantrue OnDash T2 User Manual

3. Connect the micro USB port of OBD cable to the to the Micro
USB of Camera Mount Base.
4. Plug the OBD cable to the OBD socket of your car.
Attention:
shows.

4. Basic Operation

4.1 Power ON/OFF.

A. Power with car charger.
1. Once the power of the vehicle is on, the camera automatically
turns on.
2. If you disconnect with the power, the camera turns off.
B. Power with OBD plug.
The camera keeps on all the time until the Under Voltage
Protection system detects your car battery in low power status
(car battery power output is under 11.5V).
The location of most cars' OBD port is in area as picture
- 9 -
1080P FULL HD