Screen Overview; Installing A Memory Card; Getting Started - Vantrue OnDash T2 User Manual

11 Snapshot/ Emergency
Button
12 Microphone
13 Mini USB Port
14 AV OUT Port
15 HDMI Port
16 Reset Button
17 Micro SD Card Slot
18 OBD Cable
19 DC Converter Box

Screen overview

Recording Standby Status
Recording
Loop Recording Time
Parking Mode On
Parking Mode OFF
Time Lapse ON
Memory card
inserted or not

3. Getting Started

3.1. Installing a Memory Card

Please use a genuine Micro SD memory card from 16GB to 64GB
with a speed rating of class 10 or higher. Carefully insert the memory
card into the camera's card slot until it clicks. To remove the card,
power off the camera first, then push the card into the slot until it
clicks again.
Snapshot: Manually locks the currently
recording video clip following emergency
or to preserve important videos.
Records clear audio with the video
footage.
USB port for charging or transferring
data.
AV OUT connects to external device.
For HDMI (High-Definition Multimedia
Interface) cable.
Press to force reset the device.
Provides expandable storage (up to
64GB in FAT32, Class 10).
Connect the device with the car.
Protection of DC lines.
Video Resolution
00:00:23
Recording Time
3
(current clip)
Exposure
0
2018/05/03
Current Date (YYYY/MM/DD)
and Time (24H)
- 5 -
Snapshot
Emergency File Lock
Wave Guard Indicator ON
1080FHD
Speed Unit
003KM/H
G-Sensor ON
HDR Mode ON
05:00:53
MIC is ON
MIC is OFF
GPS Signal Locked
GPS Signal Connecting