Time Lapse - Vantrue OnDash T2 User Manual

NOTE: If you need to use the Parking Monitor or the 24/7 (All Time)
Protection function, please use the OBD power installation.

4.8 Time Lapse

If Time Lapse is selected, the camera will take static photos at the set
time interval - either 1, 5 or 10 seconds - to create a video montage.
For example, if you set Time Lapse 1sec, the camera will take one
photo every second, and then stitch the photos together into a 1 fps
video. With a maximum recording frame rate of 30fps, recording
8 hours of video with Time Lapse 1Sec will generate a time lapse
video lasting just 16 minutes (=8 x 60 x 60/30/60). This Eco Mode is
recommended for storage cards with smaller capacities.
[Normal Recording Time = Time Lapse Recording Time (Sec) x Recording
Frame Rate FPS x Time Lapse Option]
The camera will auto get out of time lapse recording mode next
time when the camera is turned off. And when the camera is turned
on again, it will record in normal mode.
00:00:23 1080FHD
3
0
2018/05/03 05:00:53
00:00:23 1080FHD
3
0
2018/05/03 05:00:53
- 16 -