Wave Guard Parking Monitoring - Vantrue OnDash T2 User Manual

4.7 Wave Guard Parking Monitoring

Parking Mode operates as a sentry function under different situations.
Go to "RECORD SETUP"►"Parking Monitor", press OK and select the
following distance options: Far, Middle or Near.
To protect your vehicle continuously during parking mode, the
camera will start recording and save to Normal video folder when
it detects moving objects. This is represented by an icon (P) at the
top right side of the screen. When the camera itself feels no vibration
after 5 minutes of recording, the camera automatically to enter the
parking mode.Then the P icon appears on the screen and the screen
goes out. In Parking Mode, once the microwave from the camera
detects movement at the front, it will start auto-recording; it will stop
recording after 10 seconds of inactivity. The P icon appears again
and the screen goes out. In Wave Guard Parking Monitoring, videos
are saved to Normal video folder.
If the camera detects any collisions (detected by G-Sensor) in
parking mode, it will start record and save to Event video folder.
00:00:23 1080FHD
3
0
2018/05/03 05:00:53
00:00:23 1080FHD
3
0
2018/05/03 05:00:53
- 15 -