Use A Pc To Update The Software - Fluke CableAnalyzer DSX-602 User Manual

DSX-602 CableAnalyzer
Users Manual

Use a PC to Update the Software

To prevent unexpected loss of power, connect the
ac adapter to the tester when you update the
software.
The software update procedure does not delete
the test records, project settings, or user
preferences in the tester, but can possibly change
the factory-installed cable types or test limits.
1 Install the latest version of LinkWare PC software on your PC.
LinkWare PC is available on the Fluke Networks website.
2 Connect the AC adapter to the tester and connect the
Micro-AB USB port on the tester to a type A USB port on the
PC. See Figure 31.
3 LinkWare PC automatically tells you if new software for the
tester is available on the Fluke Networks website, and lets you
install the software.
Older versions of LinkWare PC do not start the
update procedure automatically. For older
versions, you must have the software update file
on a disk or USB drive and click
update procedure.
4 The tester reboots when the update is completed. To make sure
the update was installed correctly, tap the TOOLS icon on the
home screen, tap Version Information, then make sure the
correct version shows.
5 Do steps 2 through 4 again for the remote. On a remote
tester, the LEDs show the progress of the installation.
96
W
Caution
Note
Note
to start the