Update The Software; Options And Accessories - Fluke MultiFiber Pro User Manual

MultiFiber Pro Optical Power Meter and Fiber Test Kits
Users Manual

Update the Software

W
To prevent unexpected loss of power when you
update the software, put new batteries in the
meter and source if the low-battery icon shows
( ).
The software update procedure does not delete the
test records in the meter or the user preferences in
the meter or source.
1 Install the latest version of LinkWare software on your
PC.
2 Download the MultiFiber Pro update file from the
Fluke Networks website, or contact Fluke Networks to
get the update by other methods. Save the file to your
hard drive.
The update file is in a zipped folder. You must
extract the file before you can install the update in
the meter or source.
3 Extract the update file (.mfp extension) from the
zipped folder.
32
Caution
Note
Note
4 Connect the meter or source to the PC with the USB
cable provided, as shown in Figure 12.
5 On the LinkWare menu, select Utilities > MultiFiber Pro
> Software Update, find and select the update file,
then click Open.
The meter or source display shows
installation process.
6 To make sure the update was installed correctly, look
at the software versions on the meter and source. See
"See the Software Version and Calibration Date" on
page 31.

Options and Accessories

For a complete list of options and accessories visit the Fluke
Networks website at www.flukenetworks.com.
during the