Verify Operation; Clean The Tester - Fluke CableAnalyzer DSX-602 User Manual

DSX-602 CableAnalyzer
Users Manual

Verify Operation

The tester does a self test when you turn it on. If the tester shows
an error or does not turn on, refer to "If the Tester Does Not
Operate as Usual" on page 102.

Clean the Tester

To clean the touchscreen, turn off the tester, then use a soft, lint-
free cloth that is moist with water or water and a mild detergent.
To clean the case, use a soft cloth that is moist with water or
water and a mild detergent.
Do not put the tester or the battery pack in water.
To prevent damage to the touchscreen or the case,
do not use solvents or abrasive materials.
When you clean the touchscreen or the case, do not
let liquid get under the plastic around the
touchscreen.
94
W X
Warning
W
Caution