Manage Projects On A Flash Drive - Fluke CableAnalyzer DSX-602 User Manual

If your project has both a Next ID set and sets with first and last
IDs, the % Tested value includes tests you saved with Next ID. For
example, if you have one Next ID set and one set with 10 IDs, and
you save 10 results with next IDs, the % Tested shows 50% (10
saved results divided by 20 IDs).

Manage Projects on a Flash Drive

You can export or import projects to or from a flash drive, and
delete projects on the flash drive. The project data includes all
project settings, test results, and ID sets.
Do not remove the USB flash drive while the LED on

the drive flashes. Doing so can corrupt the data on
the drive.
You can lose a USB flash drive, cause damage to it,

or accidentally erase the contents of the drive. Thus,
Fluke Networks recommends that you save no more
than one day of test results on a flash drive.
The tester reads only USB drives that use the FAT
format.
1 Connect a USB flash drive to the type A USB port. The tester
makes a bell sound when it detects the drive.
2 On the home screen, tap the PROJECT panel.
3 On the PROJECT screen, tap TRANSFER.
4 On the TRANSFER PROJECTS screen, select a function:
Export: On the EXPORT PROJECTS screen, select the

projects you want to export to the flash drive, then tap
EXPORT.
Manage Projects on a Flash Drive
W
Caution
Note
Chapter 5: Use Projects
-continued-
81