Fluke CableAnalyzer DSX-602 User Manual page 87

A
B
Figure 29. CABLE ID SETUP Screen
(after you enter the first and last IDs)
First ID and Last ID: The first and last IDs in a set of sequential IDs.

If you do not enter a Last ID when you make an ID set, the tester
will increment the First ID to make subsequent IDs.
The tester does not increment symbols or
accented characters.
When you use an ID set that does not have a Last ID, the set
under IDs Untested on the CHANGE ID screen shows only the
next ID.
C
Note
Chapter 5: Use Projects
The CABLE ID SETUP Screen
D E
BA09.EPS
79