How To Use The Touchscreen - Fluke CableAnalyzer DSX-602 User Manual

DSX-602 CableAnalyzer
Users Manual

How to Use the Touchscreen

The DSX-602 main unit's Taptive
touchscreen to control the tester. You can operate the
touchscreen with your fingertip or with a stylus that is made for
projected capacitance touchscreens.
For correct operation and to prevent damage to the
touchscreen:
 Touch the screen only with your fingers or with a
stylus that is made for projected capacitance
touchscreens. Do not use too much force.
Do not touch the screen with sharp objects.

The touchscreen will not respond if you tap it with
your fingernail or an incorrect type of stylus or if
you wear non-conductive gloves.
To use the touchscreen
To select an item on the screen, tap the item lightly with your

fingertip.
To scroll a screen, lightly touch the screen then move your

fingertip in the direction you want the screen to move.
 On screens that show a plot, you can drag the measurement
cursor. These screens also have a zoom function, as shown in
Figure 7.
To clean the touchscreen
Turn off the tester, then use a soft, lint-free cloth that is moist
with a mild detergent.
When you clean the touchscreen, do not let liquid
get under the plastic around the touchscreen.
18
™
user interface lets you use a
W
Caution
Note
W
Caution