Sl2100 Voip Resource Capacity; Sl2100 Configuration - NEC SL2100 Quick Install Manual

NEC SL2100 Communication System

SL2100 VOIP Resource Capacity

The SL2100 CPU cards have 8 VOIP resources built in, these can be expanded further by adding the VOIPDB
card (BE116500) and VOIP channel licenses (BE116744).
Adding the VOIPDB card provides 16 VOIP resources, the VOIP channel license provides an additional 16
resources up to 128 channels maximum.
Note - The VOIPDB card must be installed in order to use the VOIP channel license.
CPU Only
VOIP
Channels
8 ch
SRTP /
Non-SRTP
The quantity of VoIP resources required is determined by the end-point type: IP or TDM, as shown below.
SLNet channel
SLNet channel
This example shows the minimum quantity of VOIP resources for each SL2100 system if the customer requires
the maximum quantity of simultaneous SLNet calls to be available between each node.
No trunk channels are included in the example.

SL2100 Configuration

Currently only PCPro supports the setup of SLNet configuration items, System Phone or WebPro does not
support SLNet items.
Quick Install Guide – SL2100 SLNet rev1.0
CPU with CPU with
VOIPDB VOIPDB + 1 x
VOIP channel lic
16 ch 32 ch
Quantity of VOIP resources required
SIP Trunk
2 2
7
CPU with
VOIPDB + 2 x
VOIP channel lic
48 ch
Digital/Analog/Hybrid
Terminal
1
CPU with VOIPDB +
7 x VOIP channel lic
128 ch
IP Terminal
2