1- Unpack The Sl2100 System - NEC SL2100 Quick Install Manual

NEC SL2100 Communication System

1- Unpack the SL2100 System

SL2100 Chassis unit
1 x SL2100 system
1 x Wall mounting template
1 x Power cord (selected regions)
4 x Fixing screws (M4.1 x 25mm)
SL2100 CPU card
1 x CPU card
1 x Lithium battery (CR2032)
SL2100 VOIPDB Card (optional)
1 x VOIPDB card
4 x Screw & washer
Additional Items Required:

Cross head screwdriver.

Utility knife or small cutters to remove the plastic knockouts

4 Wall fixing plugs suitable for the type of wall.

Solid wire for extending telephone cabling:
Recommended cable type: Twisted pair (CW1308 or similar specification)
Conductor diameter: 0.4 to 0.6 mm
Maximum cable length: (with 0.5 mm diameter cable)
SL2100 system telephone – 300 metres
Normal telephone (SLT) – 1125 metres
Requirements for SLNet:

A static IP address is required on the WAN interface – This is usually a chargeable extra on business
internet connections

You will need administrative access to the WAN router/modem/firewall device. NEC will not provide support
in configuration of this device
Quick Install Guide – SL2100 SLNet rev1.0
10