6- Security - NEC SL2100 Quick Install Manual

Security

6- Security

You should ensure that the customer's system is secure from Toll Fraud.
The Health Check feature within the InGuard Application can be used to check the system for
weaknesses.
The InGuard on-board application can also be used to give the customer ongoing protection from Toll
Fraud.
Refer to the InGuard Toll Fraud Guard Installation and User manuals for details.
Additional licenses are required to run On-board applications.
Use the Toll Restriction section of this guide to setup outgoing call restriction of numbers the customer does not
want to dial.
There is also a separate Quick Install Guide for Toll Restriction.
Auto Attendant Dial Actions
Make sure the outside callers that are answered by the VRS can only dial known digits.
Call Management
Consider the use of a call management system or call logger to give the customer visibility of calls, InReports
can be used for this.
Trunk to Trunk Transfer / Call Forward External
Do not allow these unless the customer requests the feature, ensure you setup adequate toll restriction to
prevent toll fraud.
System/PCPro Passwords
Ensure you change the default passwords for:

PCPro/WebPro

User Pro (if used)

DIM Access (if enabled for maintenance)
To edit the passwords using PCPro:
Search for password within the System Data and Easy Edit areas:
90-02=PCPro's
password
Quick Install Guide – SL2100 SLNet rev1.0
35
Select
Advanced
level