Operation Guide With Program Chart - LifeSpan EVEREST Owner's Manual

1. OVERVIEW
2. LCD WINDOW DISPLAY
SPEED: Show speed, or show P1-P16 when setting programs, from 1.0-24.0KM/h
TIME: Show time, from 0.00-99.90
DIST.: Show distance, from 0.00-99.90
CAL: Show the calories, show 0.0-999.0
3. BUTTON FUNCTIONS
"PROGRAM" button: Press this button to choose program from manual mode—P01----P16--FAT;
"MODE" button: When machine in ready state, press this button to choose the mode: mode-time count down, mode-distance
count down, mode-calories count down;
"START" button: Press this button to start the machine, the machine will run at the lowest speed or at the speed of default
program after 3 seconds time count down;
"STOP" button: Press this button to stop the machine, the machine will stop smoothly;
"SPEED+"-: Adjust the speed. Press the button to adjust the speed when running, and adjust the data when stop;
"SPEED+", "SPEED-": Adjust the speed. Press the button to adjust the speed when running, and adjust the data when stop;
"INCLINE+", "INCLINE -"： -6-20 sectional incline.
Adjust the incline. Press the button to adjust incline section when run, and adjust the data when stop;
FAN: On/off the fan.
4. MAIN FUNCTION
Open the power switch, the window will light, the machine will enter into ready state.
4.1. START-UP QUICKLY (MANUAL)
Attach the magnet end of the safety pulling rope to the computer, press 'START' button to start the machine, it will run at the
lowest speed, press SPEED+/- to adjust the speed. When you would like to stop machine, press the 'STOP' button or take
out the safety key directly
5. OPERATION GUIDE
10
Everest