Table of Contents
Advertisement
Figure 39 - Building log
In case of successful uploading you will see "Loading complete"
message in the right bottom corner of the application.
3.8.3 Download configuration from the device
Before you start, you need to create a new project or open the existing
one. In addition, your project must contain at least one device and you
must be connected to the PM180 device by any of interfaces.
To
download
configuration
from
a
device
do
the
following.
Click the right mouse button on a device and select "Import
configuration from the device" from padding menu.
Figure 40 - Import menu
After that you will see the download page.
29
Advertisement
Table of Contents
Need help?
Do you have a question about the Expertmeter PM180 and is the answer not in the manual?