Card Reader Board - HP Pavilion 15 Maintenance And Service Manual

Card reader board

Description
Card reader board
Card reader board cable
Before removing the card reader board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the optical drive (see
5. Remove the bottom cover (see
6. Remove the battery (see
Remove the card reader board:
1. Disconnect the cable from the ZIF connector on the card reader board (1).
2. Remove the Phillips M2.0×2.5 screw (2) that secures the board to the computer.
3. Remove the board from the computer (3).
Reverse this procedure to install the card reader board.
52 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Optical drive on page
Bottom cover on page
Battery on page 34).
28).
31).
Spare part number
L24929-001
L24930-001