Rj-45 Cover - HP Pavilion 15 Maintenance And Service Manual

RJ-45 cover

Description
RJ-45 cover
Before removing the RJ-45 cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the optical drive (see
5. Remove the bottom cover (see
Remove the RJ-45 cover:
1. Position the bottom cover upside down.
2. Remove the two Phillips M2.0×2.0 screws (1) that secure the RJ-45 cover to the bottom cover.
3. Lift the bracket from on top of the RJ-45 cover (2).
4. Lift up on the RJ-45 cover, and remove it from bottom cover (3).
5. Remove the spring from the bottom cover (4).
Reverse this procedure to install the RJ-45 cover.
Optical drive on page 28).
Bottom cover on page 31).
Spare part number
not spared
Component replacement procedures 33