Table of Contents
Advertisement
3.
Remove the two Phillips PM2.0×3.0 screws (2) that secure the TouchPad button board to the
top cover.
4.
Detach the TouchPad button board cable (1) from the top cover. (The TouchPad button board
cable is attached to the top cover with double-sided adhesive.)
5.
Remove the TouchPad button board (2) and cable.
Reverse this procedure to install the TouchPad button board.
Card reader board
Description
Card reader board (includes cable and double-sided adhesive)
Spare part number
746645-001
Component replacement procedures
47
Advertisement
Table of Contents
