Solid-State Drive - HP Pavilion 15 Maintenance And Service Manual

Solid-state drive

Description
256-GB, SATA-3, TLC
256-GB, PCIe, TLC
128-GB, SATA-3, TLC
16-GB, PCIe (Optane memory module)
Solid-state drive carrier
Solid-state drive board
Solid-state drive cable
Before removing the solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the optical drive (see
5. Remove the bottom cover (see
6. Remove the battery (see
Remove the solid-state drive module from the carrier:
1. Remove the Phillips M2.0×3.0 screw (1) that secures the drive to the carrier.
2. Remove the drive (2) by pulling it away from the connector.
48 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Optical drive on page
Bottom cover on page
Battery on page 34).
28).
31).
Spare part number
L25202-001
L25205-001
L25204-001
L25203-001
L24936-001
L24937-001
L24938-001