Fan; Rj-45 Module Cover - HP Spectre Maintenance And Service Manual

Fan

Description
Fan
Before removing the fan:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the base enclosure (see
Remove the fan:
1. Disconnect the fan cable (1).
2. Remove the 2 Phillips PM 2.0x4.0 screws securing the fan to the top cover (2), and then lift the
fan upwards (3).
NOTE:
secures the fan to the unit.

RJ-45 module cover

Description
RJ-45 module cover (plastics kit)
You may need to remove the piece of tape on the underside of the heat sink that
Spare part number
692890-001
Base enclosure on page
Spare part number
689948-001
27).
Component replacement procedures 35