Rj-45 Cover - HP Mini 210-2000 Maintenance And Service Manual

Reverse this procedure to install the power connector cable.

RJ-45 cover

Description
RJ-45 cover
Before removing the RJ45 cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Service access cover (see
c. Hard drive (see
d. Keyboard (see
e. Top cover (see
f. Display assembly (see
g. System board (see
Remove the RJ-45 cover:
Remove the RJ-45 cover by grasping the cover and pulling it away from the base enclosure.
Reverse this procedure to install the RJ-45 cover.
Battery on page 31).
Service access cover on page
Hard drive on page
Keyboard on page 46).
Top cover on page 49).
Display assembly on page
System board on page
34).
37).
55).
61).
Component replacement procedures
Spare part number
626580-001
65