Table of Contents
Advertisement
Configuration
4.6
Features menu
Features # # # # Install Update
68 von 105
Prerequisite: you have either
•
stored a current software package locally on your configuration
computer
OR
•
been provided with a current software package via a remote
server.
Ask your dealer or distributor whether and how you can obtain a
software update.
!
Under no circumstances should you disconnect the power
supply of the SINAUT MD740-1 during the update. The device
could be damaged and can only be reactivated by the
manufacturer.
If you have stored a current software update on your configuration
computer, proceed as follows:
1. Click on Browse... then select the file.
2. Click on Install Packages to load them into the device.
Depending on the size of the update, this procedure can take
several minutes.
If a reboot should be necessary following the system update, a
corresponding message will appear.
•
If you are provided with a current software update on a remote
server, the server's address must be set - see Features
Update Server, page 69.
Proceed as follows:
1. Write the filename in the entry field.
#
SINAUT MD740-1
Advertisement
Table of Contents
