Siemens SINAUT MD740-1 User Manual page 26

Configuration
When putting the
device into
operation:
1. Tell the device
the PIN of the
SIM card
2. Insert the SIM
card
Network # # # # Status
Display only:
26 von 105
PIN of the SIM card inserted in the device
In order for the SINAUT MD740-1 to be able to operate with the
SIM card of your network operator you must tell the device the PIN
(Personal Identification Number) of the SIM card, provided that the
SIM card has a PIN. Only after this should you insert the SIM card
into the switched off(!) device.
To do so, enter the PIN and click on OK or Apply.
If a PIN has been set, the message "Not configured yet" is no
longer displayed.
!
Enter the PIN identically in both fields.
!
The entered PIN must tally with the PIN of the SIM card with
which the device is to operate.
!
You cannot change the PIN of the SIM card with this device.
Confirm the entries on this configuration page by clicking on OK or
Apply.
Network mode
This indicates whether a GPRS connection has been
established (display: "modem connected") or whether the
GPRS modem is on standby and ready to establish a GPRS
connection (display: "(none)" or "modem (later)").
External IP /GPRS:
The IP address at which the device can be reached from the
outside. This IP address is assigned to the device by the
operator of the GPRS network for the current connection.
Default gateway via external IP:
IP address of the integrated GPRS module.
SINAUT MD740-1