Configuring The Pin - Siemens SINAUT MD740-1 User Manual

Putting the device into operation
3.2

Configuring the PIN

In order for the SINAUT MD740-1 to be able to communicate via the GPRS network of
your network operator you must tell the device the PIN (Personal Identification Number)
of the SIM card. Then you can insert the SIM card into the device.
The device also supports SIM cards without a PIN. If your SIM card has no PIN it is not
necessary to configure the PIN. You can then insert the SIM card immediately.
To configure the PIN, proceed as follows:
Enter PIN
(in both fields)
14 von 105
1. Using your Web browser (e.g. MS Internet Explorer), establish a
configuration connection with the SINAUT MD740-1.
To do this, follow the description in section 4 Configuration,
page 19 to 23.
2. When the Administrator website of the SINAUT MD740-1
appears, select Network # # # # GPRS.
In the PIN field, enter the PIN of the SIM card that you then
want to insert into the device.
!
Enter the same PIN in both fields.
Then click on OK or Apply.
Once the PIN is set, the message "Not configured yet" is no
longer displayed.
3. You can close the connection by closing the Web browser.
SINAUT MD740-1