Siemens SINAUT MD740-1 User Manual page 69

Features # # # # Update Server
SINAUT MD740-1
2. Click on Install Package Set to load it into the device.
Depending on the size of the update, this procedure can take
several minutes.
If a reboot should be necessary following the system update, a
corresponding message will appear.
If you are provided with a software update (Features
Update, page 68) for the SINAUT MD740-1 on a remote server,
enter the server's address here. This must always come before the
protocol used.
Examples: http://123.456.789.1 OR http: //www.xyz.com/update
Configuration
#
Install
69 von 105