Siemens SINAUT MD740-1 User Manual page 63

Access # # # # Language
SINAUT MD740-1
If you want to use this option, determine a user
password in the corresponding entry field.
Root Password
Default setting: root
If you want to change the root password, enter the old password
in the field Old Password, then enter the new password in the
two fields below.
(unalterable user name: admin)
Administrator Password (Account: admin)
Default setting: tainy
(unalterable user name: admin)
Enable User Password: Yes / No
User password protection is switched off as default.
If a user password has been determined below, user password
protection can be enabled or disabled with this switch.
User Password
No user password is preset as default. To determine one, enter
the required password identically in each of the two entry fields.
Please select your preferred language
If (Automatic) is selected in the language selection list, the
device automatically adopts the language setting from the
computer's browser.
Configuration
63 von 105