Siemens SINAUT MD740-1 User Manual page 57

Services # # # # DHCP
SINAUT MD740-1
Standard: 420 (sec).
Whenever the IP address of the device's own Internet
connection is or has been changed, the SINAUT MD740-1
informs the DynDNS service of the new IP address. For
reliability reasons this message is also sent at the time intervals
fixed here.
DynDNS Provider
The selectable providers support the same protocol that is also
supported by the SINAUT MD740-1.
Enter the name of the provider with whom you are registered,
e.g. DynDNS.org
DynDNS Server
Name of the server of the DynDNS provider selected above,
e.g. dyndns.org
DynDNS Login, DynDNS Password
Here you enter the user name and the password assigned to
you by the DynDNS provider.
DynDNS hostname
The hostname selected for this SINAUT MD740-1 with the
DynDNS service – provided that you use a DynDNS service and
have given the appropriate details above.
(DHCP = Dynamic Host Configuration Protocol) This function
automatically assigns the required network configuration (IP
address and subnet mask) to the client connected locally to the
SINAUT MD740-1.
Configuration
57 von 105