Siemens SINAUT MD740-1 User Manual page 55

SINAUT MD740-1
Makes it easier for the user to enter a domain name: if the user enters
the domain name in abbreviated form, the
SINAUT MD740-1 supplements his entry with the given domain suffix
which is fixed here under domain search path.
Servers to query
Possibilities: DNS Root Servers / Provider defined / User
defined
DNS Root Servers
Queries are directed to the DNS root servers on the Internet
whose IP addresses are stored in the
SINAUT MD740-1. These addresses rarely change. This
setting should only be selected if the alternative settings do
not work.
Provider defined (e.g. via PPPoE or DHCP)
The Domain Name Server of the Internet service provider is
used who provides access to the Internet. You can select
this setting with enabled DHCP (see Services
page 57).
User defined (from field below)
If this setting is selected, the SINAUT MD740-1 makes
contact with the Domain Name Servers which are listed
under User defined name servers.
User defined name servers
If you have set the option User defined under Servers to query,
in this list you configure the IP addresses of the Domain Name
Servers to be used.
!
To enable the locally connected clients can obtain the resolution
of hostnames in IP addresses from the
SINAUT MD740-1, you must determine the local IP address of
the SINAUT MD740-1 as the Preferred DNS server on the
clients.
See IP configuration with Windows clients, page 59.
Configuration
#
DHCP,
55 von 105