Table of Contents
Advertisement
BT85x Series
Datasheet
1.1.1.1 Packaging Process
Figure 20: Packaging process
12.3. Reflow Parameters
Laird surface mount modules are designed to be easily manufactured, including reflow soldering to a PCB.
Ultimately it is the responsibility of the customer to choose the appropriate solder paste and to ensure oven
temperatures during reflow meet the requirements of the solder paste. Laird's surface mount modules conform
to J-STD-020D1 standards for reflow temperatures.
Important: During reflow, modules should not be above 260° and not for more than 30 seconds.
Figure 21: Recommended reflow temperature
Americas: +1-800-492-2320
Embedded Wireless Solutions Support Center:
26
Europe: +44-1628-858-940
http://ews-support.lairdtech.com
Hong Kong: +852 2923 0610
www.lairdtech.com/bluetooth
© Copyright 2017 Laird. All Rights Reserved
Advertisement
Table of Contents
