Bsc (Cypress Serial Control) Master Interface - Laird BT85 Series User Manual

BT85x Series
Datasheet
The time periods specified in
specifications must match transmitter performance.
Figure 9: I2S transmitter timing
Figure 10: I2S receiver timing

8.5. BSC (Cypress Serial Control) Master Interface

BT850-Sx includes a Cypress Serial Control (BSC) master interface. The BSC interface supports low-speed and fast
mode devices and is compatible with I
insertion by the master interface or slave devices are not supported. The BT850-Sx provides 400 kHz, full speed
clock support.
The BSC interface is programmed by the CPU to generate the following BSC transfer types on the bus:
Read-only
Write-only
Combined read/write
Combined write-read
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
Figure 9 and Figure 10 are defined by the transmitter speed. The receiver
2
C slave devices. Multiple I
17
© Copyright 2017 Laird. All Rights Reserved
2
C master devices and flexible wait state
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610