Ac300 Setup Requirements - Angelcare AC300 Owner's Manual

SETUP REQUIREMENTS
INCLUDED:
Nursery Unit
YOU MUST PREPARE:
One hardboard (not included)
Thickness: 6 mm
Minimum dimensions:
33 cm x 33 cm
Maximum dimensions:
equal to the mattress size
IMPORTANT
The hardboard must be larger than
the Sensor Pad surface area or in
the case of the AC300-2SP of two
Sensor Pads.
BABY'S ROOM:
Sensor Pad
6
3
4
5
6
1 Sensor Pad (AC300) or
2 Sensor Pads (AC300-2SP)
with pre-installed cord covers
WHAT YOU WILL NEED (NOT INCLUDED):
Hardboard
IMPORTANT
Place the crib near a supporting wall and far from air
currents. Install the Nursery Unit on a flat, stable surface
facing the crib at a distance of at least 1 meter.
6
5
4
MOVEMENT MONITOR
Model AC300
2 1
2X
2 AA Alkaline
Batteries
IMPORTANT
Keep
at least
1 m
3 2 1
Miniature Philips
Screwdriver