Ac701 Setup Requirements - Angelcare AC701 Owner's Manual

SETUP REQUIREMENTS
INCLUDED:
Rechargeable Charging Cradle
Parent Unit
Belt Clip
YOU MUST PREPARE:
One hardboard (not included)
Thickness: 6 mm
Minimum dimensions:
33 cm x 33 cm
Maximum dimensions:
equal to the mattress size
IMPORTANT
The hardboard must be larger than the
Sensor Pad surface area or in the case
of the AC701-2SP of two Sensor Pads.
IMPORTANT
BABY'S ROOM:
Place the crib near a supporting wall and far from air currents. Install
the Nursery Unit on a flat, stable surface facing the crib at a distance
of at least 1 meter. Make sure to plug the adapter to the socket outlet
nearest to the equipment and that is easily accessible.
Sensor Pad
Nursery Unit
Hardboard
6
5
TOUCHSCREEN MOVEMENT
& SOUND MONITOR
Model AC701
5
6
1 Sensor Pad (AC701) or 2 Sensor Pads (AC701-2SP)
with pre-installed cord covers
2X
2 AC Adapters
WHAT YOU WILL NEED (NOT INCLUDED):
2X
2 AA Alkaline
Batteries
for Nursery Unit
IMPORTANT
Keep
at least
1 m
apart
4 3 2
3 2 1
4
2X
2 AAA Rechargeable
Batteries
for Parent Unit
Miniature Phillips
Screwdriver
1
91