Ac701 Setup Requirements - Angelcare AC701 Owner's Manual

SETUP REQUIREMENTS
INCLUDED:
Rechargeable
Parent Unit
4
5
6
Sensor Pad with pre-installed cord covers
YOU MUST PREPARE:
One hardboard (not included)
Thickness: 1/4' ('6 mm)
Minimum dimensions:
13'' (33 cm) x 13'' (33 cm)
Maximum dimensions:
equal to the mattress size
IMPORTANT
The hardboard must be larger
than the Sensor Pad(s) surface area.
BABY'S ROOM:
Sensor Pad
Nursery Unit
3 2 1
Hardboard
IMPORTANT
Place the crib near a supporting wall and far from air currents. Install
the Nursery Unit on a flat, stable surface facing the crib at a distance
of at least 3 feet (0.9 meter). Make sure to plug the adapter to the
socket outlet nearest to the equipment and that is easily accessible.
6
5
4
TOUCHSCREEN MOVEMENT
& SOUND MONITOR
Model AC701
Charging Cradle
2X
2 AC Adapters
WHAT YOU WILL NEED (NOT INCLUDED):
2X
2 AA Alkaline
Batteries
for Nursery Unit
IMPORTANT
Keep
at least
3 ft (0.9 m)
apart
3 2 1
Belt Clip
2X
2 AAA Rechargeable
Batteries
for Parent Unit
Miniature Philips
Screwdriver
E
N
7