Angelcare AC701 Owner's Manual page 100

5.2 - SOUND
TO ADJUST THE SOUND:
Press + or - buttons to adjust
the volume level.
NOTE:
At level L0 the level bar will still appear on
the screen and the icon will blink. If you press
the blinking sound icon again, it automatically
activates the Mute function. The Bar will disappear
and a cross will appear in the icon screen. To
DEACTIVATE, press the sound icon again. (Refer to
6.6 for more information on Mute mode).
TO LOWER VOLUME LEVEL TO L0
TO TEST THE SOUND:
Ask someone to speak into the Nursery
Unit to ensure that sound is being
picked up.
IMPORTANT
To avoid feedback (whistling), keep
both units at least 3 m apart.
5.3 - BATTERIES
HOW TO CHECK THE BATTERIES:
Unplug the AC Adapters from both units.
• If the green light on the Nursery Unit does not show, replace the batteries.
• If the Parent Unit and its screen do not light up, recharge the batteries.
HOW TO CHARGE THE BATTERIES IN THE PARENT UNIT:
Leave the Parent Unit in the Charging Cradle
to fully charge the unit. Although the batteries
at 1/3 capacity works normally, we recommend
that you fully recharge them.
100
Press the
(-) button
to select the
L0 level
(see step 6.6)
PARENT UNIT BATTERY ALARM
• Alarm activates when batteries need to be recharged.
• Parent Unit will emit a beep sound every 20 seconds.
• Battery icon will flash on Parent Unit screen.
Raise volume
level (+)
Lower volume
level (-)
PUT IN TALK BACK MODE
Press and hold
the Talk Back
button to speak
to your baby.
IF YOU HEAR NO SOUND:
• Check that both units are switched on.
• Check that both units are plugged
into a working electrical outlet.
• Check the batteries in both units
(replace or recharge them as necessary
per unit).
• Bring the Parent Unit closer to the
Nursery Unit.
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
1/3 full 2/3 full full