Replacing Cutter Blade - Xerox X2 User Manual

Operating the cutter (con't)
Procedures
Platen guide
1
2
24

Replacing cutter blade

The procedures to replace the cutter blade are:
1. At the printer's operations panel, press the
2. Use the arrow buttons to scroll to Replacing
3. The operation panel will display: "Move to the
3
4. The operation panel will display: "Open
5. Open the top cover and then press the button
6. Manually move the cutter blade to the very
7.
8. To remove the cutter, push down the cutter
Menu button (top button) to enter menu mode.
Blade and press the associated button to
proceed.
center". Press the associated button to move
the cutter blade to the center.
top/front cover". Open the top cover. After
opening the top cover, the panel will again
instruct to open the front cover.
associated with NEXT.
center if not properly centered.
The operation panel will display: "Replace
blade and press reset".
blade.
Operations