Trouble isolation procedures (con't)
Procedures
Option
MAG. SINGLE
MAG. MULTI
48
Adjustment auto mode (con't)
1. Press the MENU button and enter to the MENU
2. Use the right and left key to scroll the menu
3. Press the button associated with the Adjustment,
4. Press the button associated with EXECUTE
5. If you want to correct specific areas, scroll
Magnification correction in the sub scanning direction (for 1 pass).
Magnification correction in the sub scanning direction. (for multi pass )
<ADJUSTMENT, AUTO>
MAG. SINGLE
MAG. MULTI
<MORE>
mode.
display. Select the ADJUSTMENT, AUTO
display status.
<MENU>
ADJUSTMENT, AUTO
<MORE>
Auto option.
(bottom button) to perform automatic adjustment.
through the ADJUSTMENT, AUTO options, and
then press the EXECUTE button. The following
table describes the various options.
Description
<MAG. SINGLE>
PRESS EXECUTE KEY
<MAG. MULTI>
PRESS EXECUTE KEY
Appendix A: In Case of Difficulty
EXECUTE
EXECUTE