No. Of Stitches Setting - Brother S-7250A Instruction Manual

4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

4-9-2. No. of stitches setting

1
Switching to setting item display
2
Set the number of stitches
3
4
Press the key.
43
In sewing standby mode, press the
the key to switch to design switch setting mode.
While referring to "4-9-1. Switching the display item", select the step
of the design stitch which you would like to change, and then switch
to number of stitches setting mode.
・ When the C key is pressed, the number of stitches for the
selected step decreases by 1.
・ When the D key is pressed, the number of stitches for the
selected step increases by 1.
If the number of stitches is set to 1 or more, the setting for the
selected design stitch step is applied to the sewing operation.
* The number of stitches for step 1 cannot be set to "0".
Setting mode will be exited and normal operation will be possible.
S-7250A
key while holding down
1619D
1622D