Correction Sewing Function (1) - Brother S-7250A Instruction Manual

4-6-10. Correction sewing function (1)

When the correction sewing function (A04) is enabled, the hand switch correction sewing function can be set.
For details on the functions which can be set, refer to "4-12. Hand switch" for the settings when the hand switch is set as a
correction sewing switch.
1
Selecting "A31 HSCF" (correction sewing
2
function)
Press either.
Displaying the correction sewing function
3
setting value
Setting the correction sewing function
4
(Correction
sewing function
disabled)
5
Press the key.
4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
In sewing standby mode, press the
the
・ "A01 UPdn" will be displayed.
Press the -
・ When the
・ When the
・ When the
・ When the D
"oFF" to "1" through to "9".
・ When the C
"9" through to "1" to "oFF".
・ When the
NOTE:
If the
(Correction
will switch off and the display will return to the setting item.
sewing function
enabled)
Setting mode will be exited and normal operation will be possible.
S-7250A
key to switch to function setting mode.
or + key to select "A31 HSCF".
+
key is pressed, the next setting is displayed.
-
key is pressed, the previous setting is displayed.
key is pressed, the setting value is displayed.
key is pressed, the setting value increases from
key is pressed, the setting value decreases from
key is pressed, the initial value will be reset.
key is pressed once more, the
key while holding down
1369D
1385D
indicator
1386D
34