Short Trailing Thread - Brother S-7250A Instruction Manual

4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

4-6-9. Short trailing thread

When short trailing thread is enabled, the trailing length of the thread can be made shorter.
1
Selecting "A21 ttSH" (short trailing thread)
2
Press either.
3 Displaying the short trailing thread setting value
Setting short trailing thread
4
(Short trailing
thread function
disabled)
5
Press the key.
33
In sewing standby mode, press the
the
・ "A01 UPdn" will be displayed.
Press the -
・ When the
・ When the
・ When the
・ When the D
・ When the C
・ When the
NOTE:
If the
will switch off and the display will return to the setting item.
(Short trailing
thread function
enabled)
Setting mode will be exited and normal operation will be possible.
S-7250A
key to switch to function setting mode.
or + key to select "A21 ttSH".
+
key is pressed, the next setting is displayed.
-
key is pressed, the previous setting is displayed.
key is pressed, the setting value is displayed.
key is pressed, the "on" display will appear.
key is pressed, the "oFF" display will appear.
key is pressed, the initial value will be reset.
key is pressed once more, the
key while holding down
1369D
1383D
indicator
1384D