Pitch Setting - Brother S-7250A Instruction Manual

4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

4-9-4. Pitch setting

1
Switching to setting item display
2
Set the pitch
3
4
Press the key.
45
In sewing standby mode, press the
the key to switch to design switch setting mode.
While referring to "4-9-1. Switching the display item", select the step
of the design stitch which you would like to change, and then switch
to pitch setting mode.
・ When the C key is pressed, the pitch for the selected step
decreases by 0.05 (mm).
・ When the D key is pressed, the pitch for the selected step
increases by 0.05 (mm).
Setting mode will be exited and normal operation will be possible.
S-7250A
key while holding down
1625D
1626D