Other Cords - Brother S-7250A Instruction Manual

2. INSTALLATION

2-4-2. Other cords

Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet
before opening the cover of the control box. Touching areas where high voltages are present can result in severe
injury.
For Europe specifications, Americas 220 V specifications and 100 V/400 V system specifications, connect the cords
according to the respective specifications.
<Seen from underneath table>
9
DANGER
Control box
Green and yellow wire (ground wire)
S-7250A
<Europe specifications>
(1) Filter box
(2) Screws [4 pcs]
(3) Connector
(4) CE bush plate
(5) Screws [2 pcs]
(6) CE D cord cover
(7) Screws [2 pcs]
(8) Staples [4 pcs]
(9) Power cord
1. Attach an appropriate plug to the
power cord (9). (The green and
yellow wire is the ground wire.)
2. Insert
properly-grounded electrical outlet.
NOTE:
・ Take care when tapping in the
staples (8) to make sure that they do
not pierce the cords.
・ Do
otherwise
problems may result.
Leg
1480D
the power plug into
not use extension
machine operation
a
cords,