Using The Operation Panel (Advanced Operations); Adding And Deleting Steps - Brother T-8421D Instruction Manual

4
Using the operation panel (Advanced
operations)

Adding and deleting steps

You can put together programs, such as the one shown
in the illustration for pocket sewing or name label
sewing, by registering multiple steps in the main
sewing section.
• Steps can be added (up to a maximum of 20
steps) to or deleted (to a minimum of 1 step) from
the currently-selected program.
• However, if fixed stitch sewing or reverse fixed
stitch sewing is not selected, it will not be possible
to switch to this mode.
1
Press [ ] > [Program setting] > [Add/
Delete step].
The program number, step number, sewing
pattern and cursor for the currently-selected
program are displayed.
2
Press or
position.
When adding a step
3
Press .
A step will be added after the cursor position.
• The sewing pattern for the added step will be
the fixed stitch sewing pattern.
• If the number of steps has already reached 20,
no further steps can be added.
to change the cursor
When deleting a step
4
Press .
The step at the cursor position will be deleted.
However, if only one step is remaining, the delete
key will be disabled.
5
Press .
Press this to return to the Home screen.
When more than one step had been added for sewing,
the number of stitches in the step which is currently
being sewn will be completed, and then sewing will
continue on to the next step.
43