Confirming The Monitor Status (Status); Controlling The Monitor (Control) - Sharp TL-M5200 Setup Manual

Confirming the Monitor
Status
(Status)
On this screen, you can confirm the monitor
status. You can confirm the following items :
• • • • • MAC Address
Power
• • • • •
• • • • • Condition
Input
• • • • •
• • • • • Signal Info
Serial Number
• • • • •
Note
• If you click the "Refresh" button before the
screen is displayed completely, an error
message ("Server Busy Error") will be dis-
played. Wait for a moment and then oper-
ate again.
• For details about each item, refer to the
monitor's operation manual.
Controlling the Monitor via LAN
Controlling the Monitor
(Control)
On this screen, you can perform monitor con-
trol. You can control the following items :
Power
• • • • •
Input Select
• • • • •
Volume
• • • • •
AV Mute
• • • • •
Note
• If you click the "Refresh" button before the
screen is displayed completely, an error mes-
sage ("Server Busy Error") will be displayed.
Wait for a moment and then operate again.
• You cannot operate this page while the moni-
tor is warming up.
• While the monitor is in standby mode, you
can only control "Power ON".
• For details about each item, refer to the
monitor's operation manual.
-17