Advertisement
Quick Links
M SERIES
Heavy Duty Mortise Lock
INSTALLATION GUIDE
Inside Lever
1. Insert spindle into hub of lock case.
2. Place spring cage with arrows pointing in
3. Cap inside rose over spring-mount assembly.
4. Insert inside spring into lever hole and
5. Insert turn piece assembly and fasten with
direction of lever rotation and mounting
plate (spring-mount assembly) onto lock
case and fasten into screws.
tighten inside lever bushing with spanner
wrench.
screws.
Front Plate
1. Install outside front plate onto
lockcase front and then fasten
with screws.
Advertisement
Related Manuals for Cal-Royal M SERIES
Summary of Contents for Cal-Royal M SERIES
- Page 1 M SERIES Heavy Duty Mortise Lock INSTALLATION GUIDE Inside Lever 1. Insert spindle into hub of lock case. 2. Place spring cage with arrows pointing in direction of lever rotation and mounting plate (spring-mount assembly) onto lock case and fasten into screws.
- Page 2 M SERIES Heavy Duty Mortise Lock Door Preparation Installation Template 1. Align door preparation template on of Cylinder edge of door with applicable lines. Lockcase Installation Check door preparation chart and of Front mark only holes for lock function Plate 1.
- Page 3 M SERIES Heavy Duty Mortise Lock 1-1/4” DIA 1-1/4” DIA LOCK CYLINDER HOLE CYLINDER HOLE CASE MORTISE 3/4” DIA 3/4” DIA THUMBTURN THUMBTURN HOLE HOLE of Lock of Lock 1” DIA 1” DIA LEVER HOLE LEVER HOLE of Lever of Lever 3/8”...
- Page 4 M SERIES Heavy Duty Mortise Lock STRIKE TEMPLATE 1-1/4” 1” 1-1/8” DEEP STRIKE 3/8” LOCK 4-7/8” HEIGHT 1-5/8” 5/16” DOOR FRAME VIEW...