Advertisement
Quick Links
CR9000
Stand-alone Touchscreen Access Lock
Installation and Programming Instructions
Take the time to read through this guide to familiarize yourself with the features and
operation of the lock, and its quick and easy programming procedures.
Save this PROGRAMMING INSTRUCTIONS for future reference
Note: Improper installations may result damage to the lock and void the factory warranty.
Advertisement
Related Manuals for Cal-Royal CR9000
Summary of Contents for Cal-Royal CR9000
- Page 1 CR9000 Stand-alone Touchscreen Access Lock Installation and Programming Instructions Take the time to read through this guide to familiarize yourself with the features and operation of the lock, and its quick and easy programming procedures. Save this PROGRAMMING INSTRUCTIONS for future reference...
- Page 4 Note: IMPORTANT: For uncut Doors and Frames A. Mark Centerline...
- Page 5 A. Unpack the Lock B. Determine Handing of Door and Change Lever Orientation Accordingly 1. Remove the handle & lock body. 1) Insert key, rotate the key 90 degrees clockwise. 2) Depress retainer with tool provided. 3) Slide the lever off the lock. 4) Slice the lockbody off the escutcheon.
- Page 6 2. Rotate the Lock body. 1) Rotate the Lock body 180 degrees clockwise and insert the detached Touchpad cable as “A”. Connect Motor cable connected with Motor cable on the lock body as “B” 3. Assemble the lock body with Escutcheon. 1) Insert the lock body into the escutcheon as per the image below.
- Page 7 CAUTION :...
- Page 8 CAUTION : DOOR MUST REMAIN OPEN DURING INSTALLATION. USE DOOR STOP. Mechanical Test Electronic Test [123456] and press the [ • • • • •...
-
Page 9: Programming Guide
PROGRAMMING GUIDE... - Page 10 [For example, you wish to register RF Cards for User 11 and User 12 respectively.