Transferring A Fixed Sweep Profile Using Q-Browser - Arcom Digital Quiver XT User Manual

Transferring a fixed sweep profile using Q-browser.

Transferring a fixed sweep profile is easy using Q-browser rev 5.0.0.11 and above.
Profiles can be overwritten but cannot deleted. The instructions to follow explain how
to transfer a profile into the Quiver XT:
1. Turn the Quiver-XT power on and wait for the main menu to appear. Then
connect the Quiver XT by USB to your PC.
2. Launch the Q-browser program and click "Update profile". Click "Ok" when
asked to confirm. Navigate to the folder that contains the profile(s), click OK,
and then OK to confirm the folder being transferred. The Progress bar will
quickly display the transfer and clear.
3.
Once the progress bar is clear the transfer is complete. Close Q-browser and
disconnect the USB cable from the Quiver.
Q-browser is running. Disconnecting the USBV cable without closing Q-browser
first will disable key function until the power is cycled.
Note, Quiver buttons are disabled if
66