Save Image/ Waveform/ Setup - Promax OD-590 User Manual

USER'S MANUAL. OD-590/91/92

7.2.2 Save image/ waveform/ setup

Operation
Save Setup
Save
Save/Recall
Waveform
More
1. Press the Save/Recall key→F3 (Setup) or F4 (Waveform) or F5→F1
(Image) or F5→F2 (All).
2. (For Image and Save All) To select the display background color,
press F2 repeatedly.
3. (For Waveform) To select the waveform source, press F2. Then use
the Variable knob.
4. To select the location type, press F3 repeatedly. Then use the
Variable knob.
5. (Storing to USB flash drive) Connect the USB flash drive to the front
or rear panel USB connector.
Note: USB rear panel host and rear panel slave connection cannot
be used at the same time.
Page 95
F 3
Save
F 4
Image
F 5
Save All
InkSaver
(setup,image)
Source
(Waveform)
Destination
Save
File Utilities
(USB only)
F 1
F 2
F 2
On/ Off
(4CH) CH1/ 2/ 3/ 4,
Math, RefA/ B/ C/ D
(2CH) CH1/ 2,
F 2
Math, RefA/ B
Setup: S1~20, USB
F 3
Waveform:
W1~20, USB,
F 4
(4CH) RefA/ B/ C/ D
(2CH) RefA/ B
Image, All: USB
F 5
01-2007