Table of Contents
Advertisement
Available languages
Available languages
USER'S MANUAL. OD-590/91/92
7. Printout/ Data Transfer
7.1 Printout
7.1.1 Printout display image
The oscilloscope of the series OD-590 allow to print, directly to a printer
connected to the port USB, the image showed in the screen of the oscilloscope.
Operation
Hardcopy
Utility
Menu
HardCopy
1.
Press Utility key→F1. Press F1 repeatedly until "Printer" appears.
2.
To select the display background color, press F2 repeatedly.
3.
To select the color and portrait, press F3 repeatedly.
4.
To select the image size, press F4. Then use the Variable knob.
5.
Connect the printer to the front or rear panel USB connector.
Note: USB rear panel host and rear panel slave connection cannot be
used at the same time.
Page 91
Function
F 1
Printer
InkSaver
(Color)
Ratio
Front panel USB
CH1
F 1
F 2
Color Landscape
F 3
Color Portrait
Gray Landscape
Gray Portrait
F 4
Rear panel USB
RS232
GO / NO GO
(Open collector)
On/ Off
5 ~ 75
01-2007
Advertisement
Chapters
Table of Contents
