Select The Vertical Cursor Type - Promax OD-590 User Manual

USER'S MANUAL. OD-590/91/92
Source
CH1~CH4 (4CH model)
CH1~CH2 (2CH model)
MATH
Horizontal (cursor type)

5.3.2 Select the vertical cursor type

Operation.
Cursor
1. Press the Cursor key→F1. To select the channel, press F1
repeatedly.
2. To select the cursor to be activated, press F3 repeatedly.
3. To move the cursor, use the Variable knob.
4. The bottom right corner of the display shows the positions of two
cursors (V1 & V2) and their voltage difference (∆).
Page 41
Channel1~Channel2 waveform
Channel1~Channel2 waveform
The waveform as a result of the math
operation.
Both T1 and T2 are invisible.
T2 is active, T1 is fixed. Variable knob
moves only T2.
T1 is active, T2 is fixed. Variable knob
moves only T1.
Both T1 and T2 are active. Variable knob
moves T1 and T2 together.
(4CH ) CH 1 / 2 / 3 / 4 /
MATH
( 2 CH ) CH 1 / 2 /
F 1
MATH
F 3
/
/
01-2007